The Complete BIOS Guide: Every Setting Deciphered and Explained!

      Comments Off on The Complete BIOS Guide: Every Setting Deciphered and Explained!

Enter BIOS by enabling F2 while the computer boots.
In the BIOS setup monitor, very often press the down arrow key until you highlight Integrated Peripherals.
Press the down arrow button several times until Parallel Port is highlighted.

Built-in Parallel Port: This setting actually lets you decide whether you want to select resources in Parallel Field Mode or disable the synchronized port entirely. If your client has nothing connected to the parallel port, disabling it will free up valuable system resources.

Integrated Peripherals, Continued

How do I access integrated peripherals in BIOS?

Turn on or restart your computer.
Setup instructions for instructors are provided on-screen.
Press “Pause Pause” and eventhe corresponding buttons to adjust the system availability.
Use the arrow key to select Advanced, Built-in Devices, and Built-in Devices from the menus.

Integrated Peripherals, Peripherals, Continued

Joins A Sequel

Embedded 1394 (Firewire): This credit enables or disables the built-in IEEE 1394 (Firewire) port on the PC. If there are hardly any Firewire devices in the system, or if the Firewire port is not currently connected to the motherboard, disable this device to free up valuable resources.

Access the floppy controller. Most modern PCs do not have a floppy drive. If it’s a PC and you never use your fragile phoneIf you prefer to have peripherals for other purposes, remove that peripheral. Note. If you purchased a floppy drive and choose to disable it here, it probably won’t work until you go back into the BIOS and enable it again.

Built-in Serial 1: Most people no longer use serial ports to connect external devices as most of them have been replaced by their USB counterparts. If you are not using your system’s serial ports, disable grids and free up resources. On the other hand, if you are using a serial port, you should set this option to 3F8/IRQ4 .

Built-in serial port 2: as above if you use it far away. If you want to use it, set it to 2F8/IRQ3 .

UART2 Use as: UART (Universal Asynchronous Receiver/Transmitter) is an alias that receives and transmits serially; Prove that every serial port you have will definitely use one, although it’s easy enoughTo place multiple ports on a single chip. Many motherboards offer a device that you can use instead of serial port 2 and this is where you can make that decision. A home adapter must be installed on the system board (usually sold separately) in order to use infrared.

Equivalent to built-in port. This option allows you to decide whether to select parallel port mode for large resources or disable the parallel port. If you don’t mind the parallel port, disabling it will most likely free up valuable system resources. But if you are using a parallel connection, I recommend setting the situation to 378/IRQ7.

Parallel port mode. If you have disabled the synchronized port, this setting has no effect. However, if the parallel port is enabled all the time, it must be configured to act as an EPP (Enhanced Linked Port) or ECP (Enhanced Feature Port). EPP mode is recommended when there is probably only one device in the system, actually a printer connectedto its parallel port. Select ECP if your organization has several specific devices, such as an external Zip drive, scanner, printer, or tape drive, connected in series to the system’s parallel field. Be sure to use IEEE-1284 compliant parallel cables to take full advantage of this.

Selecting ECP DMA. If you select ECP or EPP and remember ECP as the parallel port policy above, this option is available to you. This allows your DMA company to choose which channel (direct memory access) you want to use. I recommend the default configuration 3.

Integrated game port. If you have added a sound credit card to the system, either yours or someone else who does not use legacy MIDI devices or joysticks, this feature must be disabled in order to share footage. However, if you are using all built-in ports, I play with the default setting of 201.

Built-in MIDI I/O: Musical Instrument Digital Interface (MIDI) defines a standard that allows musical instruments toOther hardware and software to communicate with each other. If you don’t use your computer to make MIDI music, you can disable this device once and for all. Otherwise, I recommend the default value of 330.

How do I enable COM ports in BIOS?

Turn off your computer and press the F10 key several times when the first screen appears.
Press the RIGHT ARROW button to select Advanced.
Use the UP and DOWN ARROW keys to select I / O Configuration and press ENTER.

Built-in MIDI IRQ: See above. When enabled, I recommend the default situation 10.

Password confirmation. If you have set a password, you should be able to tell the BIOS to ask for it when the PC boots up or when trying to hack someone’s BIOS.

S.M.A.R.T. Monitor: Short for Smart for monitoring, analysis and reporting technology. This serves as a diagnostic deterrent for predicting impending disk crashes. Enabled, if supported, near-impossible drives will report any issues that could lead to catastrophic failures.

Limit CPUID Max to 3. This setting should only be enabled for those running an older operating system with a Pentium 4 or better processor. The CPUID reference materials are used to identify a copy of the installation.Own processor. The larger the number, the more information will be collected and recorded. This is where this control comes in. Users of Vista, XP and therefore Windows 7 can safely set this option to Enabled.

What is the 10101 port for?

Serial connector pin information
Many computers call this particular serial port “10101” which means ones and zeros to represent binaries. Most computers are moving away from serial connectivity in favor of USB ports.

No Execution Memory Protection: Prevents Safeguard Buffer Flood attacks, both AMD and Intel support this feature, it’s just called differently. When this feature is enabled, certain areas associated with memory are explicitly made unexecutable, which prevents the CPU from executing potentially dangerous code in those areas.

Delay HDD by (sec): The above function is also considered to be a pre-delay of the hard disk and inmainly applies to old IDE hard drives. In some cases, older and slower hard drives did not have time to accelerate before initialization, which made them undetectable. In order to solve this problem on the motherboard, the manufacturers have given users the option to manually trigger the failure before it happens.

You only have a few seconds before the small screen disappears, at which point people won’t be able to access certain parts of the BIOS unless you restart your computer and start over. Alternatively, you can usually disable the splash screen by pressing the TAB key, which will display the default POST screen.

What is parallel port in BIOS?

ECP is probably a parallel port mode available on most computers to increase the speed at which data is always transferred and set in the host computer’s BIOS settings. BIOS manuals are largely about interacting with the operating system and your own hardware.

Init Displayy First: in ancient times, around 9 AD. BT (before the advent of Twitter), gamers moved from using PCI-based graphics cards to cards designed for the then-nascent AGP standard. This feature allowed users to tell their procedures what type of card they were using and could result in a blank screen if not configured correctly. This was mainly true when using two types of video cards on the same computer.

How do I disable parallel ports in BIOS?

Only in BIOS, you need to install devices somewhere. > port (s) stood there. > Save functions on exit and restart.

Today, gamers get what they pay for using PCI Express graphics cards based on the experience of serious gamers (it will be interesting to return to this comment in ten years). Most modern motherboards give your family the option of a PEG like your PCI Express graphics slot, possibly PCI. The last one is close to troubleshooting adding a potentially faulty graphics card to your system by plugging in a PCI card. If it’s not easy to see, change this setting to PCI.

How do I access integrated peripherals in BIOS?

Turn on or restart your PC.
Look at the onscreen instructions to start the installation.
Click “Pause-Pause” and press the corresponding keys to enter the system settings.
Use the arrow to select from the menu. Advanced, Embedded Devices, or Embedded Devices.

What is parallel port used for?

See parallel port. (2) A connector on a computer that is used to connect a printer or other device through the parallel port (eight data jobs are sent simultaneously). Historically, all parallel ports were commonly used as printers and sometimes for external connection of alternative peripherals, but these have been superseded by USB.